86-1530-5399011
Shengli Development Zone, Tancheng County, Linyi, Shandong, China
6,8,9,10,11,12,13,14,15,18,20,22,26m.
Overview of prestressed reinforced concrete poles moulds/moulds for annular/have office in Algeria/ Tanzannia/Nigeria
Concrete power pole machines / Pre-stressed Concrete Spun Pole Spinning Machine is a kind of mould equipment, which used for making a variety of different diameter and length of reinforced concrete poles and other cement products.
Pre-stressed Concrete Spun Pole Spinning Machine is operated by remote-controlled continuously variable motor. It runs smoothly and has a variable-speed range. So the production of concrete pipes and piles are good at quality.
The base of the machine is welded in box-type structure, sturdiness and durability. The bearings are sealed and reliable, long life. Random electric control equipment is complete and easy to use.
Working Principle of prestressed reinforced concrete poles moulds/moulds for annular/have office in Algeria/ Tanzannia/Nigeria
1. Adding the slurry into the mould, it is driven quickly and rotated in the same speed of the machine. Each component is separated and released under the centrifugal force. Usually the higher the slurry rotate speed, the better the slurry separating effect.
2. Centrifugal sedimentation is the use of different density of each component in the slurry, which is rotated under the centrifugal force. To realize the liquid - solid (or liquid - liquid) separation.
3. The speed of separation is slow when the viscosity of slurry is high.
4. It is good for centrifugal sedimentation when the slurry density is different in each component.
Technical Parameter of prestressed reinforced concrete poles moulds/moulds for annular/have office in Algeria/ Tanzannia/Nigeria
top end inner diameter (mm) | Tread (mm) | Running wheel diameter (mm) | Length (m) |
150 | 2000 | 600 | 7-12 |
170 | 2000 | 600 | 7-12 |
190 | 2000 | 650 | 7-15 |
230 | 2000 | 650 | 6-9 |
300 equal diameter | 2000 | 600 | 6-9 |
350 equal diameter | 2000 | 650 | 6-12 |
310 | 2000 | 650-780 | 6-15 |
Features of prestressed reinforced concrete poles moulds/moulds for annular/have office in Algeria/ Tanzannia/Nigeria
1. Saving a great deal of steel, about 30~70% (employing cold drawn steel wire can save 30%~60%; employing high stress steel wire can save 40%~69%).
2. Crack resistance can increase about 3~5 times.
3. Rigidity increases 1~3 times.
4. Reducing the cost (using cold drawn steel wire can reduce 25%~40%; using high stress steel wire can reduce 12%~21%).
5. Good durability, can delay the existence and expansion of cracks.
6, Protect the environment on which human beings depend on for existence, and reduce the deforestation
Skype: 0086 15305399008
Supporting services such as installation, commissioning and training complete the turnkey offering and an experienced helpdesk provides the through-life commitment to shengya's customers.
Design, Materials and Construction of Concrete Poles:
The concrete poles shall be designed and manufactured in accordance with Kenya
Standard DKS 1933.
The poles shall be round, Prestressed or Reinforced Concrete Poles as per DKS 1933.
The materials used shall be in conformity with the design standard (DKS 1933) and
shall be selected to suit intended application.
The pole shall be so designed that its strength in transverse direction shall be sufficient
to take the load due to wind on conductors, fittings and the pole.
In accordance with Annex A of DKS 1933, the aggregates used in the manufacturer pf
the pole shall be free from veins and adherent coating and free from injurious amount of
disintegrated pieces, alkali, vegetable matter and other deleterious substances. As far
as possible, flaky, sconaceous and elongated pieces shall be avoided.
The surface of all reinforcement shall be free from loose scale, oil, grease, clay or other
material that may have deleterious effect on the bond between the reinforcement and
concrete.
The mix design, mixing and compaction of the concrete shall be such that the necessary
strength in the pole is obtained after curing in accordance with DKS 1933.
Concrete shall be compacted by vibration, centrifugation or other efficient means. Hand
compaction shall not be permitted.
The finished pole shall have a smooth external surface that is free from honeycombing.
A quarter (¼) of the poles supplied for each consignment shall incorporate an integral
earthing system comprising a non stressed internal earthing copper conductor (at least
70mm² stranded conductor) running the length of the pole and the ends of the
conductor shall be left projecting from the pole to a length of 100mm at 200mm from top
and 150mm below ground level. Manufacturer may offer alternative suitably designed
earthing termination for consideration
Concrete electric pole making machine:
Feeding machine:
Other related machine in our company:
